How do I change between the different Map Types?

As you’re scoping out hunting areas looking for a flat piece of ground that gets good sunlight for a
food plot, or maybe a saddle where you can ambush deer taking a shortcut, you need different types of maps. That’s why DeerCast outfits you with a satellite map, a topographical map, and a terrain map, giving you the best of all worlds! Cycle through them by following the directions below. 

1. First, navigate to your map tab. It’s the tri-folded map button on the lower left side of the navbar.
2. Once your map is open, tap the map type button on the lower right side of your screen. It defaults
   to satellite and will be abbreviated with SAT.
3. Tap it again to switch to the topographical map. It shows as TOP.
4. Tap once more to load the terrain map. It shows as TER.
5. Tapping once more brings you back to your satellite map.
   • The satellite map provides a mix of satellite and aerial imagery, which is helpful to determine timber canopy, field edges, and water sources. It really is like having a bird’s eye view of your ground. It’s your default map since it’s likely where you’ll spend the most time adding waypoints,
     taking measurements, and adding food plots.
   • The topographic map incorporates relief shading to illustrate elevation changes across the
     landscape.
   • The terrain map is similar to your topo map, but it features more detailed contour lines.